Government Website icon

The .gov means it's official.
A .gov website belongs to an official government organization in the United States.

Padlock icon

The site is secure.
The https:// or lock icon ensures you're safely connected to the website and any information you provide is encrypted.

Publications iconKansas Register

Volume 41 - Issue 13 - March 31, 2022

State of Kansas

Department of Transportation

Notice to Consulting Firms

The Kansas Department of Transportation (KDOT) is seeking a qualified consulting firm or team of firms to perform professional services for the project(s) described in Table 1 below. Interested consultants must email a proposal to KDOT.DesignContracts@ks.gov by 12:00 p.m. (CDT) April 8, 2022, to be considered for selection.

Consultant Prequalification

Interested consulting firms must be prequalified by KDOT or otherwise demonstrate qualification in category 241 Construction Inspection and Testing.

If a firm is not currently prequalified by KDOT, a proposal may still be submitted. Firms not prequalified must also provide documentation that demonstrates the firm is qualified for each specified category listed in this notice for the project. Firms must use the KDOT prequalification form to provide this documentation. KDOT 1050 Prequalification Category Definitions (Blue Book) can be found at http://www.ksdot.org/descons.asp. Consultants may create a team to meet the prequalification requirements. All firms doing business with KDOT must be registered and in good standing under the laws of the State of Kansas at the time of contracting and must comply with applicable state and federal laws, rules, and regulations.

Table 1: Resource and Inspection Needs
Project Number Resource and Inspection Needs
KA-6376-01 Project manager and inspectors as necessary to inspect: Chip seal, traffic control, CMS or AASHTOWare data entry, all project records, all project paperwork, and final paperwork, etc.
KA-6380-01 Project manager and inspectors as necessary to inspect: Chip seal, traffic control, CMS or AASHTOWare data entry, all project records, all project paperwork, and final paperwork, etc.

Table 2: Project Summary
Project Number Route and Scope Project Location
KA-6376-01 - 021
Chip Seal
K-18 in Dickinson County beginning at the Ottawa/Dickinson County line to west junction K-15/K-18. K-15 in Dickinson County beginning at west junction K-15/K-18 to east junction K-15/K-18
KA-6380-01 K148- 106
Chip Seal
KA-6381-01: K-148 in Jewell County beginning at junction K-148/K-28 to the Jewell/Republic County line. KA-6382-01: K-148 in Republic County beginning at the Jewell/Republic County line to Junction US-81/K-148

Anticipated Consultant Scope

KDOT anticipates the following to be included in the consultant’s scope: Construction Inspection/Testing.

  • Note 1:
    • KA-6376-01 will be managed out of the KDOT office in Junction City, Kansas.
    • KA-6380-01 will be managed out of the KDOT office in Belleville, Kansas.
  • Note 2:
    • KDOT has or plans to let projects KA-6376-01 and KA-6380-01 to the same contractor.

Anticipated Schedule and Key Dates

  1. Proposals are due by or before 12:00 p.m. (CDT) April 8, 2022
  2. Anticipated Start Dates and Estimated Working Days:
    1. KA-6376-01
      1. Start Date: August 1, 2022
      2. Estimated Working Days: 10 days
    2. KA-6380-01
      1. Start Date: July 15, 2022
      2. Estimated Working Days: 15 days

Instructions for Proposal

  1. No cost or pricing information shall be submitted with the proposal. Proposals including cost or pricing information will be considered non-responsive and withdrawn from further consideration.
  2. The consultant’s proposal must not exceed 4 pages total (including any cover letter, index, etc.). All pages shall be standard letter size (8.5” x 11”). Any page larger than standard letter size will be count as two or more pages depending on size.
  3. A single PDF (2MB maximum size) of the proposal including all attachments must be emailed to KDOT.DesignContracts@ks.gov by the proposal due date and time.
  4. The subject line of the email and the PDF file name must read:
    1. KA-6376,80-01–ConstInsp for Chip Seal in Multiple Cos_FIRM NAME”
  5. The proposal must be accompanied by Special Attachments No. 8 (“Tax Clearance Certificate”) and No. 10 (“Policy Regarding Sexual Harassment”). If you need a Tax Clearance Certificate, you can request one at https://www.ksrevenue.gov/taxclearance.html. Allow 2-3 business days for processing.
  6. The outline in Table 3 below describes the expected proposal organization and content sections.
  7. Table 4 lists the evaluation criteria and associated weights which will be used to make a selection.

Table 3: Proposal Content
Section Description of Intent
Cover Letter (No more than 1 page)
Project Approach Describe how your firm will meet the fluctuating inspection needs of the project.
Approach to Quality Control Describe methods or procedures your firm will use to provide all services with professional quality and technical accuracy.
Qualifications and Experience For key personnel to be assigned to the project provide names, qualifications, education, training, and expertise. Identify their area(s) of responsibility and percent of their time dedicated to the project. List work for which you do not have in-house capability and name the firm you propose to subcontract with.
Past Performance Describe team’s past performance with respect to ability to meet project schedules; quality of work; and ability to control costs on similar transportation projects, especially those performed for KDOT. Include three references and contact information.
Familiarity with KDOT and Project Area Describe team’s familiarity with KDOT’s inspection processes and standards. Describe familiarity with the project area and any identified special site conditions.

Table 4: Evaluation Factors
Evaluation Factor Weight
The quality and completeness of the response 10%
Availability to respond to the work 20%
Qualifications and experience of project manager and other key project team members proposed for services 20%
Past performance history for similar projects/services for KDOT 20%
Understanding of the project area 10%
Understanding of KDOT contract administration and closeout procedures 20%

Contract Terms and Conditions

A standard KDOT agreement for engineering and technical services will be used for professional services projects. The following special attachments will need to be provided by the selected consultant and all subconsultants with the signed work order following negotiations and will become attachments to the contract.

  • Special Attachment No. 8 (“Tax Clearance Certificate”)
  • Special Attachment No. 10 (“Policy Regarding Sexual Harassment”)

Questions

All questions regarding this request for proposals shall be emailed to KDOT.DesignContracts@ks.gov.

Questions can be submitted until March 31, 2022; answers will be provided to all prequalified consultants on April 5, 2022.

Marcia Turner, P.E., Contracts Manager
Division of Engineering and Design

Doc. No. 049964